Why Your Hot Tub Cover Stinks!

Hey, no offense, but your hot tub cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture permeates in and becomes trapped in between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is perfect for mold and mildew and other types of foul-smelling things.
If wetness has permeated further into the cling wrap foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and smelly slime, however likewise make the cover really tough to remove, and not as reliable at keeping the heat in the spa. Time for a much better kind of hot tub cover

Foul-smelling Hot Tub Cover?!?
• Broken or damaged. Cracked foam cores, ripped or used areas, torn joints. A hot tub cover that loses it’s arched roof line, to keep water draining pipes off correctly, will ultimately start to puddle water, which is most likely time to buy a brand-new hot tub cover! A spa cover with threadbare spots in the vinyl is also bad news, and although you can ward off the inevitable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your hot tub cover weekly for 2 hours of airing out. A better cover can withstand longer periods, but it’s an excellent practice to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to leave do so, but do not get rid of fragile foam panels unless absolutely necessary.

Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s easy to make a hot tub cover with tape and staples, but it won’t stop moisture effectively. Even the best foam filled Hot Tub Covers with vacuum-wrapped and heat welded joint are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine service is a hot tub cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not stunned often enough, germs and algae can make the most of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your hot tub cover cover. Due to the fact that the cover is so near the spa, it takes in the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Hot Tub Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be even worse than no roof at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times annually, so that it constantly looks excellent, and is protected from the elements. Once again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their bills.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This first step may seem obvious, however you require an excellent location to allow the cover to sit undisturbed from family pets, wild animals, and winds. It should be a bright place if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your spa cover, odd chemicals can end up in your spa water. Gently tidy all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, since the panels could become harmed during elimination or cleaning. However if you figure out that there is something slimy within, you can normally unzip and eliminate the panel for a cleaning inside and out.

How frequently does your spa dealer expect you to do all this? If your hot tub is secured from a lot of sun and rain, two times per year. If it’s visible it ought to be 3-4 times each year. Let that sink in a minute.

Better Choice
The most convenient treatment for a smelly hot tub cover is to just buy a different kind of hot tub cover A stinky swim spa cover just means that your cover is handling wetness, and things are beginning to grow! Hot Tub Covers from SpaCap.com that doesn’t use foam but has sealed air chambers rather will avoid giving the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *