Why Your Swim Spa Cover Stinks!

Hey, no offense, but your swim spa cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is among nature’s most erosive substances. Moisture permeates in and ends up being trapped in between the external vinyl shell and the plastic wrapped foam cores. The warm, damp environment is ideal for mold and mildew and other kinds of foul-smelling stuff.
If wetness has permeated even more into the cling wrap foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and smelly slime, but also make the cover actually difficult to remove, and not as efficient at keeping the heat in the spa. Time for a much better type of swim spa cover.

Foul-smelling Swim Spa Cover?!?
• Broken or damaged. Broken foam cores, ripped or worn areas, torn joints. A spa cover that loses it’s arched roof line, to keep water draining off correctly, will ultimately start to puddle water, which is probably time to buy a brand-new swim spa cover! A spa cover with threadbare spots in the vinyl is likewise bad news, and although you can stave off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A better cover can endure longer durations, however it’s a good routine to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit moisture to get away do so, but do not eliminate fragile foam panels unless absolutely needed.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, but it will not stop moisture very well. Even the best foam filled covers with vacuum-wrapped and heat welded seam are not going to keep the intense wetness from your spa from reaching the foam core. The only genuine solution is a swim spa cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not surprised frequently enough, bacteria and algae can make the most of a congenial environment to thrive. Low pH, high chlorine or high ozone levels can also degrade the underside of your spa cover. Because the cover is so near the spa, it takes in the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent stinky spa covers. (Sorry but this is just BS) The fact is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing, that can be worse than no roof at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it constantly looks fantastic, and is secured from the components. Once again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealership pay their expenses.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This first step may appear apparent, however you need a good place to permit the cover to sit undisturbed from animals, wild animals, and winds. It must be a sunny location if possible, or a dry indoor location with low humidity can also be utilized.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Do not use family cleaning products on your spa cover, weird chemicals can wind up in your spa water. Carefully tidy all outside surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, due to the fact that the panels could end up being harmed during elimination or cleansing. However if you figure out that there is something slimy inside, you can typically unzip and get rid of the panel for a cleaning inside and out.

How frequently does your spa dealership expect you to do all this? If your swim spa is safeguarded from most sun and rain, twice per year. If it’s exposed it should be 3-4 times each year. Let that sink in a minute.

Better Choice
The most convenient treatment for a stinky swim spa cover is to just purchase a different kind of swim spa cover A foul-smelling swim spa cover simply indicates that your cover is handling wetness, and things are beginning to grow! Swim Spa Covers from SpaCap.com that does not use foam however has actually sealed air chambers rather will prevent offering the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *