Hey, no offense, but your swim spa cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is among nature’s most erosive compounds. Moisture permeates in and ends up being trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is perfect for mold and mildew and other kinds of foul-smelling stuff.
If moisture has actually penetrated further into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and stinky slime, however likewise make the cover actually difficult to remove, and not as efficient at keeping the heat in the spa. Time for a better type of swim spa cover.
Smelly Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or worn spots, torn seams. A spa cover that loses it’s arched roofing line, to keep water draining pipes off correctly, will eventually begin to puddle water, which is most likely time to buy a new swim spa cover! A spa cover with threadbare areas in the vinyl is also bad news, and although you can stave off the unavoidable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Remove your spa cover weekly for 2 hours of airing out. A much better cover can withstand longer periods, however it’s a great habit to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow moisture to escape do so, but don’t remove vulnerable foam panels unless absolutely required.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, but it will not stop moisture effectively. Even the very best foam filled covers with vacuum-wrapped and heat bonded joint are not going to keep the extreme wetness from your spa from reaching the foam core. The only genuine solution is a swim spa cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned typically enough, bacteria and algae can take advantage of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can also degrade the underside of your spa cover. Since the cover is so near to the spa, it absorbs the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The reality is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor spa covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing, that can be worse than no roof at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times each year, so that it constantly looks great, and is safeguarded from the components. Once again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their costs.
Repair Your Hot Tub Cover!
• Remove to Safe Location: This initial step might seem apparent, but you require a good location to enable the cover to sit undisturbed from animals, wild animals, and winds. It must be a bright area if possible, or a dry indoor location with low humidity can likewise be utilized.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as mild as possible. Don’t use household cleaning products on your spa cover, weird chemicals can end up in your spa water. Gently clean all outside surface areas with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, because the panels might become harmed during removal or cleansing. However if you identify that there is something slimy within, you can generally unzip and get rid of the panel for a cleansing inside and out.
How typically does your spa dealer anticipate you to do all this? If your swim spa is secured from many sun and rain, twice each year. If it’s visible it ought to be 3-4 times annually. Let that sink in a minute.
The most convenient remedy for a stinky swim spa cover is to just purchase a various sort of swim spa cover A smelly swim spa cover just indicates that your cover is handling moisture, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers instead will prevent providing the mold and mildew a place to grow in the first place.