Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture leaks in and ends up being trapped in between the external vinyl shell and the cling wrap foam cores. The warm, wet environment is ideal for mold and mildew and other forms of stinky things.
If wetness has actually penetrated even more into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, however also make the cover actually tough to remove, and not as reliable at keeping the heat in the spa. Time for a better type of Swim Spa Cover

Smelly Swim Spa Cover?!?
• Broken or damaged. Cracked foam cores, ripped or used areas, torn joints. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining pipes off properly, will ultimately start to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is likewise problem, and although you can fend off the unavoidable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can stand up to longer periods, but it’s an excellent habit to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to get away do so, however do not eliminate fragile foam panels unless absolutely necessary.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, however it won’t stop moisture very well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded seam are not going to keep the intense wetness from your spa from reaching the foam core. The only real solution is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not shocked often enough, germs and algae can benefit from a hospitable environment to grow. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your Swim Spa Cover cover. Since the cover is so near the spa, it takes in the chemistry of the spa. Tidy, clear and hygienic water is the very best environment to prevent smelly spa covers. (Sorry however this is simply BS) The fact is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times per year, so that it always looks fantastic, and is protected from the aspects. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover However it will help your spa dealer pay their bills. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This initial step may appear apparent, however you need a good location to allow the cover to sit undisturbed from pets, wild animals, and winds. It needs to be a bright place if possible, or a dry indoor location with low humidity can also be utilized.
• Deodorize & Disinfect: You may not need to do both, it’s best to be as mild as possible. Don’t use family cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Carefully clean all exterior surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, since the panels could become damaged during elimination or cleansing. But if you identify that there is something slimy inside, you can usually unzip and get rid of the panel for a cleansing inside and out.

How frequently does your spa dealer expect you to do all this? If your swim spa is safeguarded from many sun and rain, twice per year. If it’s visible it should be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Much better Choice
The most convenient remedy for a foul-smelling Swim Spa Cover is to simply buy a different type of Swim Spa Cover A foul-smelling swim spa cover just means that your cover is handling moisture, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has sealed air chambers rather will avoid giving the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *